【See Your Inner Steam Deck】This transparent back cover will let you see all the hardware of your Deck. Thanks to the transparent plate you’ll be able to identify every little component in your handheld device while sporting a unique design.
【Customize Your Steam Deck】The transparent cover also comes bundled with three sets of rear buttons (each one with a different height) that let DIY enthusiasts perform steam deck modding and make their Decks even more unique.
【Enjoy a New Rear-Button Design】Each set features different heights (original, high and low), suited for all kinds of players. Each button has a more durable, anti-slip, premium texture.
【Keep Your Deck Cool】The back cover comes equipped with thermal grease as well as a heat-dissipation aluminum sheet that enhances heat-dissipation performance.
【All-in-One Set】Included in this set are 1x transparent back plate, 1 x screwdriver, 1 x disassembler stick, 1 x thermal grease (already attached to the back plate), 4 x original edition buttons, 4 x lower buttons, 4 x higher buttons, 16 x button screws, 10 x back plate screws, 10 x anti-static finger gloves.
Notes: The transparent back cover isn’t recommended for users that have no experience in DIY and/or disassembling electronic devices. We strongly recommend carefully reviewing the iFixit videos if you choose to install it or seek the services of a professional. Any equipment malfunction caused by the disassembly of the Deck, but not by this product, shall be borne by the user.
Because aluminum has good thermal conductivity, it will be hotter than other areas when touched. Be careful not to touch it to avoid being burned when you use your Deck.
Before use, please use a heat gun or hair dryer to slightly soften the thermal grease to ensure that it fits perfectly on the Back Plate. In case of accidental contact with the skin, please wipe it off immediately, then rinse with water.
Product model: PC0106
Product material: ABS+PC + Aluminum alloy
Product Dimensions: 150mm (L) x 117mm (W) x 32mm (H)
Product Weight: About 126g
x1 Transparent back plate
x1 Disassembler stick
x1 Thermal grease (already attached to the back plate)
x4 Original edition buttons
x4 Lower buttons
x4 Higher buttons
x16 Button screws
x10 Back plate screws
x10 Anti-static finger gloves.
Please read our shipping tips carefully before you place your order
All orders above $25 are free shipping.
Orders under $24.99 will be charged $5.5 as shipping cost.
JSAUX provides fast and efficient delivery services for global customers.（But unable to deliver products at military addresses (APO/FPO) and some islands.)
The current processing time for all orders takes 2-4 days(Orders are not processed on weekends).
Order delivery time will be at 7-12 business days(pre-sale items excluded).
International duties & taxes may apply and are not calculated at checkout.
Shipping time for pre-sale products is subject to the instructions on the product page.
Due to the requirements of logistics service providers:
In order to get your order ready as soon as possible and avoid shipping issues, make sure to introduce an accurate postal address including your exact house number and any other info that may be necessary for the delivery company.
For mainland China: For mainland China customers, please use Tmall to place your order. Hong Kong, Macao, please include your name, ID number and shipping address in traditional Chinese. Due to logistic reasons, it is temporarily not available for purchase in Taiwan regions.
Due to logistical reasons, we are temporarily not providing order services to the following countries and regions: Afghanistan, Albania, Algeria, Andorra, Angola, Anguilla, Argentina, Armenia, Aruba, Azerbaijan, Bahrain, Bangladesh, Barbados, Belarus, Bermuda, Bhutan, Bosnia & Herzegovina, British Virgin Islands, Brunei, Burkina Faso, Burundi, Cambodia, Cameroon, Cayman Islands, Central African Republic, China, Christmas Island, Costa Rica, Egypt, El Salvador, Ecuador,Falkland Islands, Faroe Islands, Gabon, Gambia, Georgia, Ghana, Gibraltar, Greenland, Guadeloupe, Guatemala, Guernsey, Guinea, Iceland, Indonesia, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Lebanon, Lesotho, Liberia, Liechtenstein, Maldives, Martinique, Moldova, Monaco, Montenegro, Myanmar (Burma), Namibia, Nauru, New Caledonia, Nicaragua, Niger, Nigeria, Norfolk Island, North Macedonia, Oman, Pakistan, Paraguay, Rwanda, San Marino, Senegal, Serbia, Seychelles, Solomon Islands, South Sudan, Sri Lanka, Sudan, Tajikistan, Togo, Tonga, Tunisia, Turkmenistan, Tuvalu, Uganda, Ukraine, Uruguay, India, Uzbekistan, Vanuatu, Vatican City, United States (including Puerto Rico, Guam, US Virgin Islands, Northern Mariana Islands, American Samoa, and military bases like APO, FPO, and DPO).
Our return & exchange policy will be active for 15 days from the very same day you receive your product(s) at home. For more information, please visit our Shipping Policy section.
A1.After installing the button, first, check whether there is a gap between the button and the buckle and whether it can be pressed and rebounded normally. If there is a gap that can be pressed and rebounded normally, continue to install. If there are no gaps, proceed as follows: 1) Loosen the button screw for 2-3 turns. This method can make the space inside the button bigger, but it will make the whole button feel loose. 2) Add a gasket of M3 or M4 size to the yellow nut (the size of the gasket is about 5-6mm in outer diameter, 3.2mm in inner diameter, and 0.5mm in thickness. You can also trim a gasket with harder cardboard according to this size) , this method increases the pressing space at the other end by raising the nut. 3) Slightly loosen the back cover screws near the stuck button for 2-3 turns. For example, if R4 will be stuck, loosen the three screws closest to R4. This method can increase the pressing space, please be careful not to screw it too loosely.
2. Check if there is a gap at the top, because the gap is caused by deformation, and deformation may also cause the button to get stuck. If there is no gap, continue with the installation. If there is a gap, remove the thermal grease and reinstall it.
A2. The transparent case is the same size as the original back cover. If you choose a lower or medium button , it is compatible with all JSAUX protective cases.
A3. That is normal, the thermal grease conducts heat from the Steam Deck circuit board. In addition, because the aluminum itself has good thermal conductivity, it will be hotter than other areas when touched, so be careful not to touch it to avoid being burned. If you still feel too hot, you can also remove the inner thermal grease.
A4. It will not affect the original heat dissipation of the Steam Deck. Because the air inlet and outlet of the steam deck heat dissipation are separate heat dissipation pipes, and the thermal grease will not block the heat dissipation channels.
A5. It cannot be put into the original valve carrying case and JSAUX-BG0102 carrying case, but it can be put into JSAUX shoulder bag-BG0105 or carrying case-BG0106.
A6. Actual colors may vary. This is due to computer monitors & screens displaying colors differently and everyone can see these colors differently.
Is purple, is fresh, even with the replacement triggers it fits flawlessly on the original case, the aluminium plate keeps the temperature just a little bit lower than the original and it looks amazing, wish that the front cover could be replaced as well but we can't have everything on life I guess
The fit is perfect, exactly the same as stock.
I didn't try higher buttons because I only have the stock case, and haven't tested thermals yet, but it can only get better and it looks awesome.
The package contains way more than you actually need and it creates sort of a luxury experience.
The box came a little crushed, but I got lucky, the plate is fine. But I would choose a stronger box over the finger gloves, for example.
Fits perfectly, easy to install. The metal plate gets SCORCHING hot, which means it works, I think. It takes the heat out, right?
Fits well, looks nice, allows me to attach a big heatsink to the back and overclock.
A beautiful item that couldn't have been simpler to install. The fit was perfect and Jsaux gives you every possible tool needed to complete the task. It took me less than 5 minutes to install this backplate, thanks to the very precise and detailed instructions.